Chopper Cruiser & Lowrider Parts

23rd August 2011 ( Comments)

Wheels: New Black Alloy 26″ Cruiser Bike Wheels “Combo W/Colored Tires” A-Set

New Import Set of Black Alloy Cruiser Bicycle Wheels with Your Choice of Colored Tires: Red, White, Black, & Whitewall Goodyear Pattern tires or Schwinn Brick Pattern in Red, White, Green, Pink, Yellow, Blue, Clay, Cream, Black, & Whitewall Tires. Set comes with a Front and Rear coaster Brake. Black Alloy Rims, Black spokes, and Black Hubs, Tubes, Rim Strip and colored tires.   Perfect for your Antique Ballooner, Vintage Cruiser, Rat Rod, or Custom Schwinn Chopper. Tire Size 26″x2.125″ Ballooner.

Additional DescriptionMore Details

This is Quality Import 26″x 1.75″ Black Alloy Wheel set with 26″x2.125″ tires. These baby’s are our new favorite wheels for our Lux Low Rat Rod Customs. You will Find The Black wheels a must when using our colored tires. (note colored tires do not look good on chrome wheels). Your choice of Red, White, Black, & Whitewall Goodyear Pattern tires or Schwinn Brick Pattern in Red, White, Green, Pink, Yellow, Blue, Clay (terra cotta), Cream (off white), Black, & Whitewall Tires. Comes with Tubes and Rim strips. The Wheel set combo may or may not come assembled. Try a All Black Combo for a Bad Murdered Out Look. Quality Look and Performance. These Wheels are the perfect Addition Custom Antique Cruiser Bike, Rat Rod, Vintage Schwinn Restoration, or Custom Chopper Lowrider Bicycle Project.


$180.00Price:
Loading Updating cart…

Bell: Big Honkin DING DONG Bicycle Bell 4 Cruiser Bikes

Big Honkin Ding Dong Bike Bell Goes DING DONG!!! Perfect for Vintage Schwinn Cruiser, Antique Ballooner Tank Bicycle, Townie, or Lowrider Chopper Bike.

Additional DescriptionMore Details

Large Ding Dong Bike Bell. Mounts to Your handle bars with 2 screws. Delightful Sound. Goes DING DONG !!! Nice look and performance for your vintage bicycle restoration.


$15.00Price:
Loading Updating cart…

Bell: High Chime DING DING Bicycle Bell 4 Cruiser Bikes

High Chime DING DING Bike Bell Goes DING DDIINNNGGGG!!! Perfect for Vintage Schwinn Cruiser, Antique Ballooner Tank Bicycle, Townie, or Lowrider Chopper Bike.

Additional DescriptionMore Details

High Scarp Chime DING DING Bike Bell. Mounts to Your handle bars with a screw. Delightful Sound. Goes DING DONG !!! Nice look and performance for your vintage bicycle restoration.


$12.00Price:
Loading Updating cart…

Bell: Little Ding Dong Bicycle Bell 4 Cruiser Bikes

Little Ding Dong Bike Bell Goes Ding Dong! Perfect for Vintage Schwinn Cruiser, Antique Ballooner Tank Bicycle, Townie, or Lowrider Chopper Bike.

Additional DescriptionMore Details

Small Ding Dong Bike Bell. Mounts to Your handle bars with 2 screws. Delightful Sound. Goes Ding Dong! Nice look and performance for your vintage bicycle restoration.


$14.00Price:
Loading Updating cart…

Bell: Retro Spinner Bee Bicycle for Vintage Cruiser Bikes

Cool Spinner Bee Bell Goes BBRRRRIING BRRRIINNNGG. Perfect for Vintage Schwinn Cruiser, Antique Ballooner Tank Bicycle, or Townie Bike .

Additional DescriptionMore Details

Cool Spinner Bee Bell. Mounts to Your handle bars with 2 screws. Delightful Sound. Goes BBRRRRIING BRRRIINNNGG Nice look and performance for your vintage bicycle restoration.


$10.00Price:
Loading Updating cart…

Bottom Brackets: Classic Cruiser Bicycle 24tpi Bottom Bracket in Silver or Gold

New Steel Cruiser Bike 24tpi Bottom Bracket. Comes in Silver or Gold. 24tpi does not Fit vintage Schwinn Cranks. Nice performance and look for your Classic Bicycle.

Additional DescriptionMore Details

Import Steel Cruiser Bike 24 threads per inch Bottom Bracket. Comes in Silver or Gold. The Bottom Bracket has 24tpi that is common to new and some vintage make bikes. The tpi (threads per inch) is the threading where the crank and the bottom bracket screw together. Vintage Schwinn Bottom brackets are 28tpi, This bottom bracket will not work with a Vintage Schwinn crank, but will work in a vintage Schwinn bike is you use our 24tpi cruiser crank. A Good General Knowledge of Bicycle mechanics is strongly suggested when in stalling this product. When installing headsets and bottom brackets you should install the whole produce and do not cross install what you have with the new product. Replace the whole bottom bracket. Classic Cruiser Bearing cup sizes are the same for all makes of classic cruiser bikes, In Rare cases Vintage Bikes that have seen lots of use can have stretched bottom bracket shells, in this rare case the use of shims may be necessary to in sure a proper fit when installing. Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


from $12.50Price:
Loading Updating cart…

Chain: KMC Single Speed Bicycle Chain 1/2×1/8 Black, Silver, & Gold

KMC Single Speed Bicycle Chain. 1/2″ x 1/8″  in Black,  Silver, and Gold. 4 Antique Schwinn Cruisers, Vintage Bicycle, or Custom Chopper Lowrider, Fixed Gear Single Speed Track Townie. Quality look and Performance for your Bike.

Additional DescriptionMore Details

Quality KMC Single Speed Chain, works on all single speed bikes with single sprocket drive. 1/2″ is the link length and 1/8″is its width. Chain comes full length with a Master link. You may need chain tool to remove links to fit your bike, we have a chain tool in our tools section. This chain is our replacement for all of our Vintage Schwinn Cruiser Chains. Quality look and performance for your vintage bicycle restoration or custom chopper project.


$10.00Price:
Loading Updating cart…

Chain: YBN 2 Tone Color Single Speed Bicycle Chain 1/2×1/8

YBN 2 Tone Colored Single Speed Bicycle Chain. 1/2″ x 1/8″ comes in Colors: Black, Blue, Green, Red, Yellow, White, & Silver. Perfect for Antique Schwinn Cruisers, Vintage Bicycle, or Custom Chopper Lowrider, Fixed Gear Single Speed Track Townie. Quality look and Performance for your Bike.

Additional DescriptionMore Details

Quality YBN 2 Tone Colored Single Speed Chain, works on all single speed bikes with single sprocket drive. 1/2″ is the link length and 1/8″is its width. Chain comes full length with a Master link. You may need chain tool to remove links to fit your bike, we have a chain tool in our tools section. These Chains are Industrial Painted chains, Definitely Cool and Tough, but these chains can wear faster than other finishes, keep clean for best look and Performance. Quality look and performance for your vintage bicycle restoration or custom chopper project.


$9.90Price:
Loading Updating cart…

Chain: YBN Color Single Speed Bicycle Chain 1/2×1/8

YBN Colored Single Speed Bicycle Chain. 1/2″ x 1/8″ comes in colors: Black, Blue, Green, Orange, Pink, Purple, Red, Yellow, & White  4 Antique Schwinn Cruisers, Vintage Bicycle, or Custom Chopper Lowrider, Fixed Gear Single Speed Track Townie. Quality look and Performance for your Bike.

Additional DescriptionMore Details

Quality YBN Colored Single Speed Chain, works on all single speed bikes with single sprocket drive. 1/2″ is the link length and 1/8″is its width. Chain comes full length with a Master link. You may need chain tool to remove links to fit your bike, we have a chain tool in our tools section. These Chains are Industrial Painted chains, Definitely Cool and Tough, but these chains can wear faster than other finishes, keep clean for best look and Performance. Quality look and performance for your vintage bicycle restoration or custom chopper project.


$9.60Price:
Loading Updating cart…

Cranks: Steel 7″ Cruiser Bicycle Crank, 24tpi One Piece Bike Crank

New Chrome Steel Cruiser Bike one piece Crank. Crank is 7″ or 175mm crank center to pedal center. Crank Has 24tpi threading and takes 1/2″ pedals. 24tpi does not Fit vintage Schwinn Bottom Brackets. Nice performance and look for your Classic Bicycle.

Additional DescriptionMore Details

Quality Chrome Steel Cruiser Bike one piece Crank. Crank is 7″ or 175mm Crank center to pedal center. 7″ is typically the size crank on all adult cruisers new and old. The Crank has 24tpi that is common to new and some vintage make bikes. The tpi (threads per inch) is the threading where the crank and the bottom bracket screw together. Vintage Schwinn Bottom brackets are 28tpi, This crank will not work with a Vintage Schwinn bottom bracket, but will work in a vintage Schwinn if the bottom bracket is changed to a 24tpi bottom bracket, like the one we are selling our Guts section. This 1 piece crank takes 1/2″ pedals as do all 1 piece cranks. Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$20.00Price:
Loading Updating cart…

Fixie Cranks 44t: Fixed Gear Single Speed Track Road Bike Cranks, Many Colors, 170mm x 44 tooth

Cool Fixed Gear Track Bicycle Single Speed Alloy Crank. Cranks are 170mm length with a 44 tooth Ring and Mount to a Square taper bottom bracket. Cranks come in colors: Gold, Red, Blue, Orange, Purple, Silver, Green, & White. Perfect for your Road Bike, Fixed Gear, Fixie, Track, Single Speed, Late model Lugged Steel Vintage Schwinn, Antique Bicycle Restoration, or Ratty Mc Rat Rod.

Additional DescriptionMore Details

Fixed Gear Track Bicycle Single Speed Alloy Crank. The Cranks Length is 170mm length center to center and comes with a 44 tooth Ring. The Crank Mounts to a Square taper Bottom Bracket and has Single Speed sprocket that works with a 1/8″ Chain. Cranks come in colors: Gold, Red, Blue, Orange, Purple, Silver, Green, & White. The Silver is Unpainted, The White is painted solid white and the other colors are painted metallics. Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$48.00Price:
Loading Updating cart…

Fork: Chopper Bike Triple Tree 1″ Threaded 4 Schwinn w Headset

Triple Tree Fork with a 1″ Threaded fork tube cut to fit a Vintage Schwinn. Our Custom modified fork ready to bolt on to your Antique Classic Schwinn Bicycles. The fork comes with a headset and the race installed. This is a Cool Rugged fork that adds a Stout Style to your Custom Schwinn Chopper project.

Additional DescriptionMore Details

This Triple Tree Fork 1″ Threaded, Schwinn size with headset is ready to bolt on. All you will Have to do is Install the Cups, Bearings, and fork to your Vintage Schwinn Bike. Then adjust the Fork Legs with a 6mm allen wrench, to the Desired Length ( Use the fork legs at Full length for a Chopper raked look, Shorten and Cut The Legs for a Stouter Look. ) The Fork and headset will fit any Vintage Postwar Schwinn Bike. The Fork will not Fit 24″ and 20″ Stingray Men’s bikes, we suggest you use out uncut Triple Tree fork for Those applications.


$97.00Price:
Loading Updating cart…

Fork: Chopper Bike Triple Tree 1″ Threaded uncut w Headset

Triple Tree Chopper Fork with a 1″ Threaded steer tube & Headset. This is our Custom Bicycle version, Fitting Most Antique Fat Tire Townie Lowrider Cruiser Bikes.

Additional DescriptionMore Details

This fork is Full length, un Cut and Comes with a Headset. This fork is great for the custom user and gives you a wide Range of Options, Fitting most any Vintage and Classic Cruiser Bikes. You Will Notice the steer tube is real long and will need to be cut down. Fork will take some simple Customization to Fit your Bike. 1. You will Have to Cut the steer tube to fit your Bike. 2 Use The Head set included for a proper fit. 3. Adjust the Fork Legs with a 6mm allen wrench, to the Desired Length, Use the fork legs at Full length for a Chopper raked look, Shorten and Cut The Legs for a Stouter Look. The Fork will Fit any Bike that takes a 1 ” Steer tube. The Headset that is included will fit Traditional Cruisers like Schwinn, CWC: Western Flyer, Hawthorne, and Roadmaster Bikes. This is our Custom Triple Tree Fork version. We also Have a Different item that us a precut Bolt on Schwinn Version of this fork.


$82.00Price:
Loading Updating cart…

Fork: Tubular Cruiser 1″ Threaded 4 Vintage Schwinn Bike w Headset

Tubular Cruiser Fork with 1″ Threaded Fork tube to fit Classic Antique Schwinn Bicycles. This Fork is a Sturdy Clean looking Tubular fork ready to bolt on to any 26″ Vintage Schwinn Bike. Fork comes with a headset and the race installed. The fork takes 26″ Balloon wheel and tire. This is a great replacement fork, you will find these on most of out basic Lux Low Patina Schwinn Cruisers.

Additional DescriptionMore Details

This is a our Schwinn Bolt version of the 26″ Tubular Cruiser fork with Headset. All you will Have to do is Install the Cups and Bearings and fork in to your Vintage Schwinn and your ready to go. This 26″ Tubular fork has lots of clearance accepting up to a 26″x3″ tire. The Postwar Fork Option and Headset will Fit any Vintage Classic Postwar 26″ Schwinn men’s bike and all ladies Schwinn Cruisers, Bikes from 1947 to 1980. The Prewar Option will fit Prewar Mens Schwinn Bikes from 1935 to 1942. I would Suggest our uncutt Tubular Cruiser version for custom applications.


$44.00Price:
Loading Updating cart…

Fork: Tubular Cruiser 1″ Threaded uncut 4 Vintage Bikes w Headset

This is a Tubular Cruiser Fork with 1″ Threaded fork tube, full length with headset. For your Custom Chopper Lowrider Bicycle Project.  The fork is our Custom, un cut version and comes with a Headset.  This fork is great for the custom user and gives you a wide Range of Options, Fitting most any Vintage and Classic Cruiser Bikes.

Additional DescriptionMore Details

This is a our Custom version of the 26″ Tubular Cruiser fork with Headset. You will Have to Cut the steer tube to fit your Bike and use the head set included for a proper fit. The Fork will Fit Bikes that takes a 1 ” Steer tube. The Headset that is included will fit Traditional Cruisers like Schwinn, CWC: Western Flyer, Hawthorne, and Roadmaster Bikes. This is our Custom Tubular Cruiser version. This Fork is about 1″ longer than our precut Bolt on Schwinn Version of this fork.


$38.00Price:
Loading Updating cart…

Freewheel: 5 or 6 Speed SunRace Freewheel

5 or 6 Speed Freewheel, SunRace Vintage style screw on Freewheel

Additional DescriptionMore Details

Your Choice of 5 or 6 Speed SunRace Free Wheel. The 5 Speed has 14,17,20,24,28 tooth sprockets. The 5 Speed is what is commonly used on Vintage Schwinn 5 Speed Krates, Stingrays, Fastbacks, and Manta-Ray Bicycles. The 6 Speed has 14,16,18,21,24,28 tooth sprockets. Freewheels take 3/32″ multi speed chains. Vintage Style Screw on Standard Freewheel Threads fitting most all freewheel applications. In rare cases you may run across a odd french threads, then this will not work. Note: Free wheels have the clicking with in the freewheel, not to be confused with a cassette that has the clicking in the hub. Free wheels just thread on and tighten on with use, we sell the tool to remove this freewheel in our tool section the 37410 09B1. If you need to remove your existing freewheel I would suggest going to a shop because there are many freewheel remover tools for different freewheels. This part is Perfect for your Fab Fixie Fixed Gear Single Speed Creation, Vintage Schwinn Bicycle Restoration or Custom Chopper Lowrider Cruiser Project.


$22.00Price:
Loading Updating cart…

Grips: Chrome & Foam Chopper Lowrider Cruiser Bike Grips

Cool Chopper / Lowrider Grips. Nice Look and Comfortable. Perfect for your Vintage Custom Schwinn Cruiser Bicycle.

Additional DescriptionMore Details

Nice Chopper Grips with soft foam grip and chrome end caps. Fits standard 7/8″ end handlebars. Nice look and performance for your vintage bicycle restoration or custom chopper project.


$20.00Price:
Loading Updating cart…

Grips: Classic Vintage Prewar Tank Bicycle Torpedo Grips

Quality Reproduction or Early American Bicycle Torpedo Grips. Perfect for Antique Schwinn Cruisers, Vintage Bicycle, or Custom Chopper Lowrider, Fixed Gear Single Speed Track Townie. Quality look and Performance for your Bike.

Additional DescriptionMore Details

These are Quality Reproduction Early American Bicycle Torpedo Grips. These Grips were commonly used on Early American Prewar Bikes. These Grips were user on Sears Elgin Bikes, Colson, Shelby and Huffman Made Bicycles. These Grips are Quality Construction and Look at a Good Price.


$55.00Price:
Loading Updating cart…

Grips: Vintage Coke Bottle Style Tank Bicycle Grips

Coke Bottle Style Antique Reproduction Bicycle Grips. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie. Quality look and Performance for your Bike.

Additional DescriptionMore Details

These are Quality Reproduction Coke Bottle Style Bicycle Grips. I Think They are an English Style Grip, but I Have found that with their Cool look and Comfortable feel, they work great on on Early American Prewar and Post War Ballooner Bikes or Your Custom Schwinn Cruiser Bicycle. These Grips are New, Quality Construction, Look, And Comfort at a Good Price. Grips fit on Standard Bicycle 7/8″ handlebars.


$20.00Price:
Loading Updating cart…

Handlebar: Classic Steer Horn Cruiser Bike Handle Bar

The Traditional Cruiser Bicycle Classic Steer Horn Handle bar. The bars come in 2 versions: 7/8″ diameter with the Traditional Flared 1″ or 25.4mm center (Classic). 7/8″ or 22.2mm diameter with the Traditional 7/8″ center to use with our 4 Bolt BMX Style stems.

Additional DescriptionMore Details

New Quality Chrome Steel Steer Horn Handlebar. This is the Classic Cruiser Handlebar used for ages also Know as Texas Steer Horn. The Bar is 7/8″ Steel tubing that is 29 1/4″ wide with 3″ of rise . The bars come in 2 versions: The 1″ or 25.4mm Center and 7/8″ or 22.2mm Center. The 1″ Traditional Flared center Handle bar is used on all Classic Vintage Schwinn & Cruiser Bicycles with 1″ standard stems. The 7/8″ center handle bar is to use with 4 Bolt BMX style stems. The 7/8″ center version provides maximum strength against slipping, and is strongly suggested in large handle bar applications for Extreme leverage. The 7/8″ center version and 4 bolt stem is what are used on our ever popular Deibo Vintage Schwinn Cruiser Bikes. This Steer Horn handle bar is a real wide version, common to some of the Prewar steer horn handle bars. In some post war cases these bars are longer than originals and the user can cut down the bars for exact restorations. These Handle Bars have Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$15.00Price:
Loading Updating cart…

Handlebar: Half Round Cruiser Bike Handle Bar

Our Half Round Handle Bar is our Smaller Round handlebar. The bars come in 2 versions: 7/8″ diameter with the Traditional Flared 1″ center (Classic). 7/8″ or 22.2mm diameter with the Traditional 7/8″ center to use with our 4 Bolt BMX Style stems.

Additional DescriptionMore Details

New Quality Chrome Half Round Handlebar. The Bar is a swooping round radius made of 7/8″ Steel tubing. The Bars are 29″ wide and have 4″ of rise. This Half round handle bar is our smaller round version handle bar, similar style to some of the Prewar bike half round handle bars. These Bars are similar to Antique Colson Handlebars and Vintage Ladies handlebars although wider than most vintage ladies Handle bars, these prove to be more comfortable than the originals. The bars come in 2 versions: The 1″ or 25.4mm Center and 7/8″ or 22.2mm Center. The 1″ Traditional Flared center Handle bar is used on all Classic Vintage Schwinn & Cruiser Bicycles with 1″ standard stems. The 7/8″ center handle bar is to use with 4 Bolt BMX style stems. The 7/8″ center version provides maximum strength against slipping, and is strongly suggested in large handle bar applications for Extreme leverage. These Handle Bars have Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$22.00Price:
Loading Updating cart…

Handlebar: Track Bar / Fixie / Flat Drag Chopper Bar 2 Sizes 10 Colors

This is our Track Bike HandleBar or Flat Drag Chopper Bar available in Steel or Alloy. The Steel handle bars Comes in Brilliant Metallic colors: Blue, Gold, Green, Pink, Purple, Orange and Solid Non Metallic Colors : Black, Red, and White. Handlebar is also available in Classic Chrome finish.  The Alloy  Bars come in Black, Blue, Red, Silver, and White. Color on Ally Bars are Suttle. These Bars come in 2 sizes: Factory Length or cut down Slim Fixie Size. The Alloy Bars are Close to Half the weight of the steel Bars. Handlebars are 7/8″ diameter with the Traditional Flared 1″ or 25.4mm center.

Additional DescriptionMore Details

New Quality Track Bike HandleBar or Flat Drag Chopper Bar. These Bars come in 2 sizes: Factory Length 24 1/2″ or 620mm wide or cut down Slim Fixie size 18 1/4″ or 465mm wide. Handlebars are Classic Common size bars that are 7/8″ diameter, and have 7/8″ rise with a Traditional Flared 1″ or 25.4mm center. 1″ Center is common with most all Classic Road and Cruiser applications. These Bars work with our Fashion Road Track Bike Quill Stems and 2 Bolt stems. Bars May Not work with some odd sized French and Italian Stems. The Handle bars come in Chrome Steel or Painted Steel (full size weight approx. 16 oz. and Cutdown weight approx. 12oz.) or Alloy (Matte Alloy Finish or Painted Alloy (full size weight approx 8.5 oz. and Cutdown weight approx 7oz.). The Slim Fixie Size are hand Cut and ground clean, They will be missing paint on the end (its covered up by Grips). Slim Fixie Size is cut to accommodate a Full size grip only. If you Plan to Run brake levers we suggest you get a full size bar and cut it your self to add room for a brake lever. Handlebars are powder coated with color and are tough and durable, but will scratch with abuse. This is out Top selling Track Bar, Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


from $16.00Price:
Loading Updating cart…

Handlebar: Wide Half Moon Cruiser Bike Handle Bar

This is our Mega Wide Half Moon Handle bar. The bars come in 2 versions: 7/8″ diameter with the Traditional Flared 1″ or 25.4mm center (Classic). 7/8″ or 22.2mm diameter with the Traditional 7/8″ center to use with our 4 Bolt BMX Style stems.

Additional DescriptionMore Details

New Quality Chrome Half Moon Handlebar. The Bar is a wide swooping round radius made of 7/8″ Steel tubing. The Bars are 31 3/4″ wide and have 3″ of rise. This Half Moon handle bar is a real wide version, common style to some of the Prewar mens bike half moon handle bars. The bars come in 2 versions: The 1″ or 25.4mm Center and 7/8″ Center. The 1″ Traditional Flared center Handle bar is used on all Classic Vintage Schwinn & Cruiser Bicycles with 1″ standard stems. The 7/8″ or 22.2mm center handle bar is to use with 4 Bolt BMX style stems. The 7/8″ center version provides maximum strength against slipping, and is strongly suggested in large handle bar applications for Extreme leverage. These Handle Bars have Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$25.00Price:
Loading Updating cart…

Headset: Chrome 7/8″-22.2mm Vintage Schwinn Cruiser Bicycle Size

7/8″-22.2mm Classic Cruiser Bike Chrome Headset: Nice Durable Headset that Fits Classic & Vintage Schwinn Cruiser Frames and CWC Frames like: Western Flyer, Hawthorne, and Roadmaster Bikes.

Additional DescriptionMore Details

The 7/8″ or 22.2mm Denotes the Stem Size that will fit through the top nut, this dimension is relative to the head tube hole in your fork. You will want your Stem to fit in the top nut and fork tube snugly for proper performance. Vintage Schwinn’s used the 7/8″-22.2mm size on Bikes Predating 1965, (1965 and Before). Note: the Bottom Race DOES NOT Fit Classic Schwinn Forks, you will have to use an Original Schwinn bottom race or use a shim. This is the head set we ship and use with our Lux Low Forks. We Also Sell This headset in Gold and a smaller 13/16″-21.1mm version for Schwinn’s 1966 and there after.


$14.00Price:
Loading Updating cart…

Headset: Gold 7/8″-22.2mm Vintage Schwinn Cruiser Bicycle Size

7/8″-22.2mm Classic Cruiser Bike Gold Headset: Nice Durable Headset that Fits Classic & Vintage Schwinn Cruiser Frames and CWC Frames like: Western Flyer, Hawthorne, and Roadmaster Bikes.

Additional DescriptionMore Details

The 7/8″ or 22.2mm Denotes the Stem Size that will fit through the top nut, this dimension is relative to the head tube hole in your fork. You will want your Stem to fit in the top nut and fork tube snugly for proper performance. Vintage Schwinn’s used the 7/8″-22.2mm size on Bikes Predating 1965, (1965 and Before). Note: the Bottom Race DOES NOT Fit Classic Schwinn Forks, you will have to use an Original Schwinn bottom race or use a shim. This is the head set we ship and use with our Lux Low Forks. We Also Sell This headset in Gold and a smaller 13/16″-21.1mm version for Schwinn’s 1966 and there after.


$16.00Price:
Loading Updating cart…

Hub Part: NOS Bendix Coaster Brake Strap Vintage Bicycle B2

1 New Old Stock Bendix B2 Coasted Brake strap & New Stainless Bolt & Nut for Rear Vintage Coaster Brakes Hubs: 2 Speed Kickbacks, Red, Blue band etc. for Antique Schwinn Bikes. Free Shipping on this Item.

Additional DescriptionMore Details

1 New Old Stock Bendix B2 Coaster Brake Strap & New Stainless Bolt & Nut. Perfect unused with nice hardware. Found on Antique Schwinn Bikes. Item is NOS, Unused but can show some shelf life for its age. Free Shipping on this Item.


$14.00Price:

This product has sold out.

Light: Antique Style Torpedo Bicycle Fender Light

Antique Style Torpedo Fender Light that mounts to your fender. Perfect for your Vintage Schwinn Cruisers or Classic Ballooner Tank Bike.

Additional DescriptionMore Details

This is a New Reproduction of the Antique Torpedo Fender Light. The Light mounts to your fender with 2 bolts and takes 2 d cell batteries. Nice look and performance for your vintage bicycle restoration.


$32.00Price:
Loading Updating cart…

Light: Classic Head Light, Vintage Schwinn Stingray Bicycle Style

Classic Antique Schwinn Style Head Light that mounts to your Bike Stem. Perfect for your Antique Stingray or Retro Classic Townie Cruiser Lowrider Chopper.

Additional DescriptionMore Details

This is a New Reproduction of the Antique Schwinn Head Light. The Light mounts to front binder bolt of a Vintage Schwinn Bicycle. The Light takes 2 aa cell batteries and has a high & low and on & off settings. This Type was used on 1960′s and 1970′s Vintage Schwinn Bicycles. Nice look and performance for your vintage bicycle restoration.


$30.00Price:
Loading Updating cart…

Light: NogOffs Lights Gel Clamp on Bike Lamps

NogOffs Clamp on Gel Bicycle Lights, 1 Pair (2), 1 White front and 1 red rear clamp on Light. Lights have 4 settings: Constant, Blinky, Fast Blinky, and off. Cool Lights to Bring Safety and Fun to Your Vintage Schwinn Bike or Custom Chopper Cruiser Bicycle.

Additional DescriptionMore Details

NogOffs Clamp on Gel Bicycle Lights, 1 Pair (2), 1 White front and 1 red rear clamp on Light. Cool Economical Hipster Import Bicycle Lights. Lights are Gel Rubber and Clamp easly to a Handlebar, Seatpost or Tubular surface. Lights are Bright Led Lights and come with batterys ready to go. Great Stylish Little Lights to use Full Time or Temporary. Lights have 4 settings: Constant, Blinky , Fast Blinky, and off. Cool Lights to Bring Safty and Fun to Your Vintage Schwinn Bike or Custom Chopper Cruiser Bicycle.


$10.00Price:
Loading Updating cart…

Pedal: Antique Repro Persons Tear Drop 1/2″ Bicycle Pedals

Person Supreme Teardrop Pedal, Persons Majestic Mfg. Co. 1/2″ Fits Vintage Schwinn, & Classic Ballooner Bicycles with 1 piece cranks.

Additional DescriptionMore Details

This is a New Reproduction of the Antique Person Supreme Teardrop Pedal, Persons Majestic Mfg. Co. Worcester Mass. This pedal was considered a deluxe pedal, found on your top of the line antique bikes. The 1/2″ Denotes the post pedal size. The 1/2″ Size fits All 1 Piece cranks. These pedals are perfect for your High end Restoration. A Great Pedal for your Antique Restoration or Custom Schwinn Chopper Project.


$90.00Price:
Loading Updating cart…

Pedal: Classic Schwinn Style 1/2″ Bicycle Block Pedals

Nice, Durable, Schwinn Style Classic Bike Pedals that fit all Vintage Schwinn, Antique Cruiser & Lowrider Chopper Bicycles with 1 piece Cranks. Come with Black or White Blocks.

Additional DescriptionMore Details

The 1/2″ Denotes the post pedal size. The 1/2″ Size fits All 1 Piece cranks. Come with Black or White Blocks. These pedals are our favorite standard classic pedal great for any application.


from $15.00Price:
Loading Updating cart…

Pedal: Schwinn Krate Stingray Bow Style 1/2″ Bicycle Pedals

Nice, Durable, Schwinn Krate Style Pedals that fit all Vintage Schwinn, Krate, Stingray, Antique Cruiser, & Lowrider Chopper Bicycles with 1 piece Cranks. Comes in Classic Black Blocks with Chrome Trim, White Blocks with Chrome Trim, and Black Blocks with Gold Trim

Additional DescriptionMore Details

The 1/2″ Denotes the post pedal size. The 1/2″ Size fits All 1 Piece cranks. These pedals have a Lowrider logo on the end cap. Comes in Classic Black Blocks with Chrome Trim, White Blocks with Chrome Trim, and Black Blocks with Gold Trim. This Style Krate pedal was used on Vintage Schwinn Cruisers and Stingrays in the 1960s.


from $16.50Price:
Loading Updating cart…

Pedal: Tear Drop w Round Reflector 1/2″ Antique Wald Bicycle Style

Reproduction Teardrop Pedal with Round Reflector 1/2″ Fits Vintage Schwinn, & Classic Fat Tire Ballooner Cruiser Bikes with 1 piece cranks.

Additional DescriptionMore Details

This is a New Reproduction of the Antique Wald Teardrop Pedal with a round reflector end cap. Tear Drop pedals were considered a deluxe pedal, found on your top of the line antique bikes. The 1/2″ Denotes the post pedal size. The 1/2″ Size fits All 1 Piece cranks. These pedals are perfect for your high end restoration and every day use.


$40.00Price:

This product has sold out.

Pedal: Tear Drop w Square Reflector 1/2″ Antique Wald Bicycle Style

Reproduction Teardrop Pedal with Square Reflector 1/2″ Fits Vintage Schwinn Bikes , & Fat Tire Tank Cruiser Bicycles with 1 piece cranks.

Additional DescriptionMore Details

This is a New Reproduction of the Antique Wald Teardrop Pedal with a Square reflector end cap. Tear Drop pedals were considered a deluxe pedal, found on your top of the line antique bikes. The 1/2″ Denotes the post pedal size. The 1/2″ Size fits All 1 Piece cranks. These pedals are perfect for your high end restoration and every day use.


$48.00Price:

This product has sold out.

Rack: Repro Vintage Schwinn Phantom Rear Carrier Bike Rack

Reproduction of an Antique Schwinn Phantom Bicycle 4 Hole Rear Carrier Rack. Nice New Import Reproduction Rack, Comes in Chrome and Black, Has the spot for the tail tight. Cool Rack for your Vintage or New Cruiser.

Additional DescriptionMore Details

eproduction of an Antique Schwinn Phantom Bicycle 4 Hole Rear Carrier Rack. A New Import product, a copy of a Schwinn Phantom Rack, Not made by Schwinn but same specifications. Comes in Chrome and Black and has the spot for the tail lightRack has the spot for the tail light, although it doesn’t have the small cut out for the tail light tip. (Tail light not included, and you will have to cut a small piece out to install one.) The rack attaches to the frame behind the seat and attaches to the fender tabs on Antique Postwar Schwinn Bikes. Rack Comes Unassembled. Cool Look and performance for Your Vintage schwinn Bike or Custom Cruiser Bicycle.


$50.00Price:
Loading Updating cart…

Reflector: 7/8″ Round Glass Jewel Reflector 4 Schwinn Bike Racks

7/8″ Diameter Round Glass Jewel Reflector for Vintage Schwinn & Antique Ballooner Tank Bicycle racks & fenders. Available in 6 colors: Amber, Blue, Green,  Red, Clear, and Clear Rainbow (Polarized).

Additional DescriptionMore Details

This is a 7/8″ Round Glass Jewel Reflector in 6 colors: Your Choice of Amber, Blue, Green, Red, Clear, and Clear Rainbow (Polarized).. These were used on Schwinn balloon tire 9 and 6 Hole Racks and Other Vintage Bicycle Racks. Also used on Antique Automobile and Motorcycle Licence plates. The reflector has a #10 threaded mount stud, that is 5/8″ long, comes with a nut, and mounts to a 3/16″ hole. The photos were taken with the reflectors reflecting Light, you can see the color and brilliance, when not in direct light the reflectors are a deeper Antique Color. A Beautiful Glass Reflector to accent your Antique Schwinn Bicycle and Other Vintage Cruiser Bikes.


$14.00Price:
Loading Updating cart…

Seat Post: 13/16″ Vintage Schwinn Stingray & Cruiser Bike Size

Reproduction of a Schwinn Stingray Bicycle Seat Post, Vintage Schwinn Cruiser Specific size 13/16″ or 21.1 mm diameter and 14″ Long

Additional DescriptionMore Details

This is a New Reproduction of an Schwinn Stingray Seat Post with a diameter is 13/16″ or 21.1 mm. The seat post is 14″ Long with a 5/8″diameter top with nice chrome and solid Construction. This seat post was used on Vintage Schwinn Bicycles Pre 1980. This is a Schwinn Specific Size. This Seat post easily replaces the shorter seat post found on Vintage Schwinn Cruiser Bikes. Nice look and performance for your vintage bicycle restoration.


$14.00Price:
Loading Updating cart…

Seat: Antique Repro Hair Pin Bike Saddle High Wheel or Rat Rod

Antique Reproduction Hair Pin Saddle. A stylish replacement saddle, comes in Light and Dark Brown. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

Antique Reproduction Hair Pin Saddle that comes in Light Brown or Dark Brown. The Hair Pin saddle was commonly used High Wheel bikes, but offers a real cool style and feel to your custom chopper bicycle. Chrome rails and springs with a leather top. The seat has a 7/8″ clamp. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This seat looks best at a lowered position, if you ride high, it looks funny. Check out our Cool tubular Leather Tool bag that fits in the springs of this saddle. Tool Bag is sold separate. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$42.00Price:
Loading Updating cart…

Seat: Big Bertha Cruiser Bike Saddle Huge Soft Trike Seat!

Giant Classic Cruiser Bicycle Saddle. A Huge Stylish and Ultra Comfortable replacement seat for your Vintage Schwinn Bicycle or RatRod Chopper Bike.

Additional DescriptionMore Details

Super Cushy Trike Cruiser Saddle. Giant Adult seat, with a super soft foam, and chrome springs. The seat is Typical Adult Trike size, but can be used for any Application. The Seat is almost 14″ wide and and the same long. When you look at the bottom of the seats you can see how much bigger the seat is from others, because the springs and rails are the same size of our regular seats. The seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$45.00Price:
Loading Updating cart…

Seat: Black Comfort Bicycle Cruiser Seat a Vintage Saddle Replacement

Black Cruiser Comfort Saddle. A nice Comfortable replacement seat. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

Full Size Adult Cruiser Saddle, Soft Foam and Chrome Springs. Seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. Seat has a tall profile giving you a little more height than vintage seats. I am a big fan of original vintage seats but my customers prefer this seat due to comfort and reliability. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$35.00Price:
Loading Updating cart…

Seat: Brown Comfort Cruiser Bicycle Seat a Vintage Saddle Replacement

Brown Cruiser Comfort Saddle. A nice Comfortable replacement seat. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

Full Size Adult Cruiser Saddle, Soft Foam and Chrome Springs. Seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. Seat has a tall profile giving you a little more height than vintage seats. I am a big fan of original vintage seats but my customers prefer this seat due to comfort and reliability. The Seat had a logo on the back that’s has been removed, there is a slight color difference spot on the back of the seat, the spot is better than a logo. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$34.00Price:
Loading Updating cart…

Seat: Classic Vintage Style Deluxe Cruiser Bike Saddle Quilted

Deluxe Antique Style Cruiser Bicycle Saddle Quilted with Crash Rail. A Stylish and Comfortable replacement seat for your Vintage Schwinn Bicycle or RatRod Chopper Bike.

Additional DescriptionMore Details

Reproduction Antique Style Deluxe Cruiser Saddle. Full Size Adult seat, with a soft foam, and chrome springs, rails, crash rail ands Quilted Top. The Seat Comes in Brown. The seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$65.00Price:

This product has sold out.

Seat: Deluxe Antique Bicycle Reproduction Seat w Crash Rail

Deluxe Antique Style Cruiser Saddle with Crash Rail. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie. A Stylish and Comfortable replacement seat.

Additional DescriptionMore Details

Reproduction Antique Style Deluxe Cruiser Saddle. High Quality Full Size Adult seat, with a metal pan, soft foam, and chrome springs, rails and crash rail. The seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. I am a big fan of original vintage seats but my customers prefer this seat due to comfort, reliability, and style. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$45.00Price:
Loading Updating cart…

Seat: Velo Mattress English Touring Cruiser Bike Seat.

New Remake of an Schwinn English Touring Mattress Bicycle Seat, used On Vintage Schwinn Lightweight Bikes and Raleigh English Touring Bikes. Nice Reproduction and Comfortable replacement seat for your Vintage Schwinn Bicycle or RatRod Chopper Bike.

Additional DescriptionMore Details

Velo Mattress seat used on English Touring Bikes. Nice Reproduction (Not Quite an Exact Repro) at a Decent Price. Seat Has Nice padding and is Comfortable. These Seats were used on Vintage Schwinn Light weights like: Schwinn Breezes, Surbubans, Schwinn Tandems, Etc. Also Used on English Touring Raleigh and Other 3 Speed Bikes. The seat has a 7/8″ clamp with safety stop. If you are using a Schwinn Seat post you will have to invert the seat post and use the other end. This is a nice comfortable replacement seat for your vintage bike. This Quality look and performance for your vintage bicycle restoration or custom chopper project.


$19.85Price:
Loading Updating cart…

Seat: Vintage Type Leather Road Bike Racing Track Saddle Fixie

Antique Type Leather Bicycle Seat with Chrome Rails & Springs. Perfect for your Road Bike, Fixed Gear, Fixie, Track, Single Speed, Vintage Schwinn, Antique Bicycle Restoration, or Ratty Mc Rat Rod.

Additional DescriptionMore Details

Nice New Repro Vintage Type Saddle with Leather top and Chrome rails, Springs and Tightening adjustability. Saddle is 11″ or 279 mm long and is 6 1/8″ or 156mm at its widest point. Comes with Vintage style 7/8″ Clamp for old Seat posts, Clamp can be removed and New style seat posts can be used. This Antique Type Leather Seat is the perfect Addition To your Road Bicycle or Custom Fixed Gear ,Fixie, Track, Single Speed Bike Project, Custom Schwinn Hot Rod Creation, Ratty Mc Rat Rod, or Antique Bicycle Restoration.


$30.00Price:
Loading Updating cart…

Sprocket: Checker Plate 44 Tooth Bicycle Sprocket

Custom Chopper Checker Plate Sprocket. 44 Tooth Adult Cruiser Size. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

This is a Custom Chopper Checker Plate Sprocket 44 Tooth. Cool Design, Nice sprocket, Chrome, 44 Tooth, Typical Adult 26″ Cruiser Bikes Size. Sprocket is for single speed bikes with 1/8″ width chain. This part is Perfect for your Vintage Schwinn Bicycle Restoration or Custom Chopper Lowrider Cruiser Project.


$12.00Price:
Loading Updating cart…

Sprocket: Chopper Bicycle Rotor X 44 Tooth Sprocket

Custom Chopper Rotor X Sprocket. 44 Tooth Adult Cruiser Size. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

This is a Custom Chopper Rotor X Sprocket 44 Tooth. Cool Design, Nice sprocket, Chrome & Black, 44 Tooth, Typical Adult 26″ Cruiser Bikes Size. Sprocket is for single speed bikes with 1/8″ width chain. This part is Perfect for your Vintage Schwinn Bicycle Restoration or Custom Chopper Lowrider Cruiser Project.


$12.00Price:
Loading Updating cart…

Sprocket: Chopper Bicycle Wicked 3 Tear 44 Tooth Sprocket

Custom Chopper Wicked 3 Tear Sprocket. 44 Tooth Adult Cruiser Size. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

This is a Custom Chopper Wicked 3 Tear Sprocket 44 Tooth. Cool Design, Nice sprocket, Chrome & Black, 44 Tooth, Typical Adult 26″ Cruiser Bikes Size. Sprocket is for single speed bikes with 1/8″ width chain. This part is Perfect for your Vintage Schwinn Bicycle Restoration or Custom Chopper Lowrider Cruiser Project.


$12.00Price:
Loading Updating cart…

Sprocket: Vintage Schwinn Style 4 Hole 46 Tooth

New Chrome Vintage Schwinn Style 4 Hole Sprocket. 46 Tooth Adult Cruiser Size. Perfect for your Vintage Schwinn Cruiser Bike, Antique Fat Tire Rat Rod, or Lowrider Townie.

Additional DescriptionMore Details

This is a New Chrome Reproduction of the 46 Tooth Vintage Schwinn 4 Hole Sprocket. Commonly found on Antique Schwinn Ballooners and Vintage Schwinn Middleweight Bikes. Vintage Schwinn Bikes like: Jaguar, Hollywood, Fleets, Typhoons, Fiestas etc. Nice Reproduction and Chrome, 46 Tooth, Typical Adult 26″ Cruiser Bikes Size. Sprocket is for single speed bikes with 1/8″ width chain. This part is Perfect for your Vintage Schwinn Bicycle Restoration or Custom Chopper Lowrider Cruiser Project.


$12.00Price:
Loading Updating cart…

Stems: 4 Bolt Quill Stem, Old School BMX Bike GooseNeck in 5 colors & 2 Sizes

New Alloy & Steel 4 Bolt Bicycle Quill stem. Stem comes in 5 Colors: Silver, Black, Blue, Red, and White, in sizes  13/16″-21.1mm or 7/8″-22.2mm. The 7/8″-22.2mm stem we use on our ever popular Recycled Schwinn Deibo Cruisers and Fit Our Lux Low Forks. Tough Durable Stem with 4 Bolt Clamp Pattern giving you superior strength from handle bar slipping and must for large handle bars. These Stems are for 7/8″ center handle bars, Handlebars WITH OUT the large 1″ center.

Additional DescriptionMore Details

Quality Alloy & Steel 4 Bolt Old School BMX Type Quill Stem. Stem comes in 5 Colors: Silver, Black, Blue, Red, and White with a Chrome Steel Stem Post. Stem comes in 2 sizes 13/16″-21.1mm or 7/8″-22.2mm. The Sizes are in relation to the the size of the opening of your top nut and fork tube, the stem post diameter will have to slide in to opening snugly. On Vintage Schwinns: the 7/8″ also 22.2mm ( Bigger size ) was used from the early 1900′s to 1965, The ( smaller size ) 13/16″ also 21.1mm was used on Schwinns from 1966 till the 1980′s. You will Find this is usually the case across the industry, but measuring your top nut and fork tube is the best method. The 7/8″-22.2mm Stems fit our Lux Low Forks, the one used on our Deibos. This Stem takes a 7/8″ center handle bar, Thats a Non Flared center. If you have a traditional flared 1″ center handle bar we would suggest our 2 bolt Black Quill Stem. Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$17.50Price:
Loading Updating cart…

Stems: Alloy Bike Quill Stem, Gooseneck for 1″ Center Handle Bars, 2 Sizes &10 Colors

New Alloy Bicycle Quill stem. Stem comes in Black in the  13/16″-21.1mm size. Stem comes in 10 colors in the  7/8″-22.2mm size Black, Blue, Green, Orange, Pink, Purple, Red, Silver, White, and Yellow. The 7/8″-22.2mm stem will Fit Our Lux Low Forks. The  This Stem takes Classic Handlebars with the Flared 1″ center.

Additional DescriptionMore Details

Quality Alloy Classic Type Quill Stem.Stem comes in Black in the 13/16″-21.1mm size. Stem comes in 10 colors in the 7/8″-22.2mm size Black, Blue, Green, Orange, Pink, Purple, Red, Silver, White, and Yellow. The Sizes are in relation to the the size of the opening of your top nut and fork tube, the stem post diameter will have to slide in to opening snugly. On Vintage Schwinns: the 7/8″ also 22.2mm ( Bigger size ) was used from the early 1900′s to 1965, The ( smaller size ) 13/16″ also 21.1mm was used on Schwinns from 1966 till the 1980′s. You will Find this is usually the case across the industry, but measuring your top nut and fork tube is the best method. The 7/8″-22.2mm Stems fit our Lux Low Forks. This Stem takes a Classic traditional 1″ flared center handle bar. The Stem has 4″ of rise and a 3 1/2″ Forward Measurement, Stem is 9″ total tall. Stem Shown in the Pictures is the 13/16″-21.1mm and You Can See the step down in size on the stem post. The 7/8″-22.2mm Stem does not have the step down. Quality look and performance for your vintage bicycle restoration or custom chopper project or Fixie Fascination.


$20.00Price:
Loading Updating cart…

Tire: 2 Huge Chopper Cruiser Bike Tires 26″x 2.5″ City Tread (a Set)

Pair of 26″x2.5″ Mega Chopper Bicycle Tires, Quality Performance Street Tires for your Vintage Schwinn Bicycle or Custom Lowrider Chopper Townie Bike.

Additional DescriptionMore Details

Huge 26″ x 2.5″ Chopper Cruiser Street Bike Tire. A High Quality Tire with a huge Round profile and a Wraparound City Tread Pattern. These Tires are Urban Assault MTB Tires with a High Performance rating. The tires give you Ultimate control in Urban riding, Making this one hell of a Cruiser Street Tire. I Use these on My Custom Luxury Lowrider Schwinn Chopper Bicycles, For a Quality Look and Excellent Performance. This Tire is the perfect Addition Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle Project.


$58.00Price:
Loading Updating cart…

Tire: 20″x 2.125″ Stingray Chopper Muscle Bike Slick Tire

20×2.125 Import Slik Stingray Bicycle Chopper Tire for Your Custom Vintage Schwinn Stingray Krate Lowrider. Comes in Black or Whitewall.

Additional DescriptionMore Details

One 20″ x 2.125″ Import Stingray Chopper Tire. This is our Budget wise slick, Low Cost, Good Look, and Performance. There are No Schwinn Marking on this Tire. This Tire is the perfect Addition Schwinn Krate Stingray, Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle Project.


$15.00Price:
Loading Updating cart…

Tire: 24″x 2.10″ City Slick Chopper Cruiser Bicycle Tire

24″x2.10″ Chopper Bike Tire. A New Tire from Quality Manufacturing. Tire is Low Profile with a Round Slick Tread. Perfect for Your Custom Antique Vintage Schwinn Lowrider Bicycle.

Additional DescriptionMore Details

24″x2.10″ City Slick Chopper Bike Tire. A Quality Chopper tire with Low Profile with a Round Slick Tread. I Use these on My Custom Luxury Lowrider Schwinn Chopper Bicycles, For a Quality Look and Excellent Performance. This Tire is the perfect Addition Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle.

Wheel Not Included or Available.


$30.00Price:
Loading Updating cart…

Tire: 24″x 3″ City Slick Chopper Cruiser Bicycle Tire

24″x3.0″ CSLP Chopper Bike Tire. A New Tire from Quality Manufacturing. Tire is Low Profile with a Round Slick Tread. Perfect for Your Custom Vintage Schwinn Lowrider Bicycle.

Additional DescriptionMore Details

Super Bad 24″x3.0″ City Slick Low Profile (CSLP) Chopper Bike Tire. A Quality Chopper tire with Low Profile with a Round Slick Tread. The Lower Profile of this 24″x3″ City Slick works better in Custom Situations where Clearance is an Issue. This 24″x3″ has nice Clearance in Custom Ballooner Bike Applications. I Use these on My Custom Luxury Lowrider Schwinn Chopper Bicycles, For a Quality Look and Excellent Performance. This Tire is the perfect Addition Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle Project.

Wheel Not Included or Available.


$39.00Price:
Loading Updating cart…

Tire: Big 20″x 3″ Stingray Chopper Muscle Bike Slick Tire

Big 20″x 3.0″ Square Slick Stingray Bicycle Chopper Tire from Quality Manufacturing. The Tire is a Big Square Profile Slick. Perfect for Your Custom Vintage Schwinn Stingray Lowrider.

Additional DescriptionMore Details

Big 20″ x 3.0″ Stingray Square Chopper Tire from Quality Manufacturing. The Tire is a Big Square Profile Slick and is the one of best Reproduced Slicks on The Market, Similar to The Original Schwinn Stingray Slicks, Actually Bigger. Tire has Real Close Tolerances in Schwinn Stingrays, this Tire cannot be used with Stingrays with fenders. I Use these on My Custom Luxury Lowrider Schwinn Chopper Bicycles, For a Quality Look and Excellent Performance. This Tire is the perfect Addition Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle Project.

Wheel Not Included or Available.


$45.00Price:

This product has sold out.

Tire: Mega Slick 24″x 3″ Chopper Cruiser Bicycle Tire

24″x3.0″ Mega Slick Chopper Bike Tire. A New Tire from Quality Manufacturing. Tire has a Huge profile with a High Crown, Wide Sidewall, & S Tread Slick Pattern. Perfect for Your Custom Vintage Schwinn Lowrider Bicycle.

Additional DescriptionMore Details

Mega Huge 24″x3.0″ Chopper Bike Tire. A Quality Chopper tire with a High Crown with a Wide Sidewall and S Tread Slick Pattern. This is a Huge Bad Ol Chopper Tire with a Large High Profile. Although one of my favorite Chopper tires for look and performance, Clearance is an Issue. I Have yet been able to use one with out shaving down the crown ridge to fit in a Vintage Frame. If you Have a New Cruiser that came Stock with 24″x3″ Tires Clearance will not be an issue. I Use these on My Custom Luxury Lowrider Schwinn Chopper Bicycles, For a Quality Look and Excellent Performance. This Tire is the perfect Addition Custom Antique Cruiser Bike, Vintage Schwinn Restoration or Custom Chopper Lowrider Bicycle Project.

Wheel Not Included or Available.


$39.00Price:
Loading Updating cart…

Tires: 2 Colored Vintage GoodYear Pattern Cruiser Bike Tires -A Set

2 New Colored Vintage Goodyear Pattern Bicycle Tires. A Set of Import Reproductions of Classic Goodyear Pattern Ballooner Tires. Colored in Your Choice of  Cream, Deep Red, and White. Tires are Copy’s of and Replaces Antique Goodyear G3 All Weather Bike Tires and Other Tires. Tires are 26″ x 2.125″ Ballooner size. Excellent  Look & Performance for your Antique, Vintage, & Custom Cruiser Bike.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Goodyear Pattern. The Tires come in Solid Colors. Your Choice of Cream, Deep Red, and White. This Set of Import Reproduction Classic Goodyear Pattern Tires that are marked Duro or Inova with no Goodyear markings. Nice Ballooner Tire with a large Squarish Profile. These tires are our favorite quality replacement tire for the Antique Antique Goodyear G3 All Weather Bike Tire. Our Correct tire for Prewar Schwinn Ballooner Bicycles and Correct for all other Prewar and Postwar FatTire Cruiser Bikes. Reliable Service and Quality, Perfect to Get your Antique or New Cruiser Bike Back on the Road. Tires are 26″ x2.125″ Ballooner size. Sorry No other sizes Available. Please confirm your existing tire size when ordering for correct match.


$42.00Price:
Loading Updating cart…

Tires: 2 Colored Vintage Schwinn Brick Pattern Cruiser Bicycle Tires -A Set, Comes in Red, White, Pink, Yellow, Blue, Purple, Green, Cream, Orange, & Clay.

2 New Colored Vintage Schwinn Brick Pattern Bicycle Tires. Your Choice of Solid Red, White, Green, Yellow, Purple, Blue, Clay, Cream, Orange, or Pink in Ballooner Cruiser size 26″ x2.125″.  A Nice Set of Import Reproduction Brick Pattern Tires that are Copy’s of and Replaces Antique Schwinn Typhoon Cord and Other Cruiser Tires.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Schwinn Brick Pattern. This Set of Import Reproduction Brick Pattern Tires that are marked Duro with no Schwinn markings. Nice Tire with a Round Profile. These tires are replacement tire for the Antique Schwinn Typhoon Cord. Your Choice of Solid Red, White, Green, Yellow, Purple, Blue, Clay (terra-cotta), Cream (off white), Orange, or Pink in Ballooner size 26″ x2.125″. Reliable Service and Quality, Perfect to Get your Antique or New Cruiser Bike Back on the Road. (note this red tire is not as deep red as the Goodyear pattern red tire we offer.)


$42.00Price:
Loading Updating cart…

Tires: 2 GoodYear 26″x 1 3/4″ Schwinn Bike S-7 Tires (A Set)

2 New Vintage Goodyear Pattern WhiteWall Bicycle Tires in the Antique Schwinn  S-7 Size – 26″x1 3/4″. Fitting Only 26″ Schwinn Middleweight S7 Rims & Wheels.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Goodyear Pattern. This S-7 Size 26″x1 3/4″ is an Odd and hard to find size that only Fits Vintage Schwinn S-7 Rims. Schwinn S-7 Rims were used on Vintage Schwinn Middleweight Bikes. This Set of Import Reproduction Classic Goodyear Pattern Tires that are marked Duro with no Goodyear or Schwinn markings. Nice Middleweight Tire with a Squarish Profile. These tires are a quality replacement tire for the Antique Schwinn Westwind Bike Tire. Reliable Service and Quality, Perfect to Get your Antique Schwinn Middleweight Cruiser Bike Back on the Road. Please confirm your existing tire size when ordering for correct match.


$52.00Price:
Loading Updating cart…

Tires: 2 Vintage GoodYear Pattern Cruiser Bicycle Tires -A Set

2 New Vintage Goodyear Pattern Bicycle Tires for Classic Prewar Schwinn Antique Ballooner Tank Bikes and New Townie Fat Tire Cruisers. A Set of Import Reproductions of Classic Goodyear Pattern Ballooner Tires, with choice of sizes, and Whitewall or Black wall. Tires are Copy’s of and Replaces Antique Goodyear G3 All Weather Bike Tires and Other Tires.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Goodyear Pattern. This Set of Import Reproduction Classic Goodyear Pattern Tires that are marked Duro with no Goodyear markings. Nice Ballooner Tire with a large Squarish Profile. These tires are our favorite quality replacement tire for the Antique Antique Goodyear G3 All Weather Bike Tire. Our Correct tire for Prewar Schwinn Ballooner Bicycles and Correct for all other Prewar and Postwar FatTire Cruiser Bikes. Reliable Service and Quality, Perfect to Get your Antique or New Cruiser Bike Back on the Road. Your Choice of Size: Ballooner size 26″ x2.125″, 24″x2.125″, 20″x2.125″, all in Whitewall or Blackwall. Please confirm your existing tire size when ordering for correct match.


Price: from $35.00
from $35.00Price:
Loading Updating cart…

Tires: 2 Vintage Schwinn Brick 26″x 1 3/4″ S-7 Bike Tires (A Set)

2 NOS Schwinn Brick Pattern WhiteWall Bicycle Tires in the  S-7 Size – 26″x1 3/4″. Fitting Only 26″ Antique Schwinn Cruiser Middleweight S7 Rims & Wheels.

Additional DescriptionMore Details

2 NOS Quality Rubber Bike Tires with the Vintage Schwinn Brick Pattern. The S-7 Size 26″x1 3/4″ is an Odd and hard to find size that only Fits Vintage Schwinn S-7 Rims and Wheels. This is a New Old Stock set of Import Reproduction Brick Pattern Tires, although not as old as Original Westwind tires, These S-7 Brick Pattern Tires are No Longer Made, Thus NOS. When I Sell out of this tire they are Gone. A Nice Whitewall Tire with a Round Profile. Tire Does not have any Schwinn Markings. These tires are our favorite quality replacement tire for the Antique Schwinn Westwind tire. Our Correct Schwinn Middleweight Bicycle Tire. Reliable Service and Quality, Perfect to Get your Schwinn Middleweight Cruiser Bike Back on the Road. Please confirm your existing tire size when ordering for correct match.


$70.00Price:

This product has sold out.

Tires: 2 Vintage Schwinn Brick Pattern Cruiser Bicycle Tires -A Set

2 New Vintage Schwinn Brick Pattern Bicycle Tires for Classic Schwinn Antique Ballooner Tank Bikes and New Townie Fat Tire Cruisers. A Set of Import Reproduction Brick Pattern Tires,  with choice of sizes, and Whitewall or Black wall. Tires are Copy’s of and Replaces Antique Schwinn Typhoon Cord  and Other Tires.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Schwinn Brick Pattern. This Set of Import Reproduction Brick Pattern Tires are marked Duro with no Schwinn markings. Nice Tire with a Round Profile. These tires are our favorite quality replacement tire for the Antique Schwinn Typhoon Cord. Our Correct Postwar Schwinn Ballooner Bicycle Tire and Middle weight Tires. Reliable Service and Quality, Perfect to Get your Antique or New Cruiser Bike Back on the Road. Your Choice of Size: Ballooner size 26″ x2.125″ Whitewall or Blackwall. Middleweight Sizes: 26″x1.75″ , 24″x1.75, and 20″x1.75″ all in Whitewall or Blackwall. Please confirm your existing tire size when ordering for correct match. The Middweight tires in this section DONOT Fit Schwinn S-7 Rims, please refer to our S-7 tires for the specs.


Price: from $35.00
from $35.00Price:
Loading Updating cart…

Tires: Schwinn Cycle Truck Bicycle Tire Set Vintage Goodyear Pat.

Set of Vintage Goodyear Pattern Bike Tires for a Antique Schwinn Cycle Truck. A Set of Import Reproductions of Classic Goodyear Pattern Ballooner Tires to Fit a CT Delivery Bike with choice of Whitewall or Black wall. You Get one 26″x2.125″ tire  and one 20″x2.125″ tire, in your choice of Whitewall or Blackwall.

Additional DescriptionMore Details

2 New Quality Rubber Bike Tires with the Vintage Goodyear Pattern. This Set of Import Reproduction Classic Goodyear Pattern Tires that are marked Duro with no Goodyear markings. Nice Ballooner Tire with a large Squarish Profile. These tires are our favorite quality replacement tire for the Antique Goodyear G3 All Weather Bike Tire. Our Correct tire for Prewar Schwinn Ballooner Cycle Truck Bicycles and a Good Replacement for Postwar Cycle Trucks. Reliable Service and Quality, Perfect to Get your Antique Cycle Truck Back on the Road. You Get one 26″x2.125″ tire and one 20″x2.125″ tire, in your choice of Whitewall or Blackwall.


$42.00Price:
Loading Updating cart…

Tool Bag: Cool Retro Classic Antique Bicycle Style Tool Pouch

Vintage Bike Style Leather Tool Pouch. Comes in Dark or Light Brown. Quality Look and performance for your Antique Schwinn Bike, Chopper Lowrider, Fixed Gear Track, Single speed Fixie Bike.

Additional DescriptionMore Details

This New Leather Tool Bag Measures about 6 1/2″ wide, 1 1/2″ deep & 2 1/2″ tall. 2 adjustable straps let you easily mount it to your seat, handlebars etc.. Tool Bag comes in Dark Brown or Light Brown. Perfect for hauling Tools, Candy, Cell phones, Pickles, Minis, you get the picture. A Nice Retro Leather tool bag.


$20.00Price:
Loading Updating cart…

Tool Bag: Tubular Antique Bicycle Style Tool Pouch for Hairpin Saddles

Vintage Style Tubular Leather Bicycle Tool Pouch. Stylish Tool Bag that fits in the Springs of our Hairpin Saddle, also works with other saddles. Quality Look and performance for your Antique Schwinn Bike, Chopper Lowrider, Fixed Gear Track, Single speed Fixie Bike.

Additional DescriptionMore Details

This New Leather Tubular Tool Bag Measures 7″ wide and about 3″ round in diameter. 1 adjustable straps let you easily mount it to your seat. Fits perfectly in the Springs of our Hairpin Saddle. Perfect for hauling Tools, Candy, Cell phones, Pickles, Minis, you get the picture. A Nice Retro Leather tool bag.


$30.00Price:
Loading Updating cart…

Tubes: Bicycle Tire Tubes many Sizes Available.

Bicycle Tire Tubes, Quality Rubber Bike Tubes Many Sizes Available.

$4.00Price:
Loading Updating cart…

Tubes: Big Chopper Bicycle Tire Tubes

Our over Size Chopper Bike Tubes, Quality Rubber and Performance for your Custom Schwinn Lowrider Chopper Townie Bicycle.

from $9.00Price:
Loading Updating cart…

Wheels: New Black Alloy 26″ Cruiser Bike Wheels A-Set

New Import Set of Black Alloy Cruiser Bicycle Wheels. Set comes with a Front and Rear coaster Brake. Black Alloy Rims, Black spokes, and Black Hubs. Cool Solid black, a Great Companion with our Colored Tires.  Perfect for your Antique Ballooner, Vintage Cruiser, Rat Rod, or Custom Schwinn Chopper. Size 26″

Additional DescriptionMore Details

This is Quality Import 26″x 1.75″ Black Alloy Wheel set. These Wheels will take 26″x1.75″, 26″x2.125″, 26″x2.5″ Tires. These baby’s are our new favorite wheels for our Lux Low Rat Rod Customs. You will Find The Black wheels a must when using our colored tires. (note colored tires do not look good on chrome wheels). Quality Look and Performance. These Wheels are the perfect Addition Custom Antique Cruiser Bike, Rat Rod, Vintage Schwinn Restoration, or Custom Chopper Lowrider Bicycle Project.


$145.00Price:
Loading Updating cart…

http://luxlow.com/wp-content/themes/briefcase

Protection Plugin created by Cheap Web Hosting - Powered by Polarized Sunglasses and business logos.